Jual Repeater Weierwei VEV 300 Repeater Weierwei VEV-300

Jual Repeater Weierwei VEV 300 Repeater Weierwei VEV-300 Pusat Jual Repeater Weierwei VEV 300 Dealer Resmi Repeater Weierwei VEV-300 Jual Repeater Weierwei VEV 300 Repeater Weierwei VEV-300 Pusat Jual Repeater Weierwei VEV 300 Dealer Resmi Repeater Weierwei VEV-300' Jual Repeater Weierwei VEV 300 Repeater Weierwei VEV-300 Pusat Jual Repeater Weierwei VEV 300 Dealer Resmi Repeater Weierwei VEV-300'

Design

VEV-300, has a compact structure design, rich feature set, 30W high power output enough to provide you with fast and efficient seamless network access. It can be used outdoors, to add the effective coverage of base stations to address the issue of blind signal; can also be used as a source of indoor distribution system to address the weak indoor signals. Applicable to a broad range of users and the workplace; powerful cooling performance to ensure stability under high load, the maximum distance between the expansion of communications and cost-saving investment.

System requirements

OS: Windows98 operating system or later
Hard disk space: At least 50MB of available hard disk space
Minimum memory: 64M

1．Friendship tips

　　1) Please write in the current walkie-talkie frequency of random read carefully before use with a copy of the prospectus;
　 　2) When you write in the current walkie-talkie frequency, the software used in the process of the problems encountered, the software can view the help file (may be F1);
　　3) each corresponding to a walkie-talkie WEIERWEI computer software to write a different frequency, please check to confirm before they are allowed to write frequently.

2．Installation

Computer preparations:
　　1) Open the computer power to run the operating system;
　　2) software CD-ROM into the drive, the installation of the necessary frequency write a walkie-talkie WEIERWEI software;
　　3) run the model relative talkies WEIERWEI write-frequency software, programming appears to be a window.

Preparations for the walkie-talkie:
　　1) write-frequency end of the line 9-pin interface to connect to the computer’s RS232 (COM1) port;
　　2) to ensure that the batteries in an electric, open to write a walkie-talkie frequency;
　　3) to write the other side of the line-frequency radio to connect to an external microphone / speaker interface (right side).

3．Operation

　　1) found in the menu and click on the "time-frequency (Read From Radio)" (shortcut Ctrl + R), in the window that appears, click on time frequency;
　　2) The operation needs to be a few seconds or a few seconds, the time to be progress after the completion of the walkie-talkie that the channel has read the current software;
　　3) to amend the appropriate channel, into the soft frequency band should be in the range of the aircraft;
　 　4) found in the menu and click on the "write-frequency (Write To Radio)" (shortcut Ctrl + W), in the window that appears, click the write frequency can be;
　　5) When the progress bar is complete, you revise that after the success of the channel has been written into the walkie-talkie;
　　6) If you need more than the same walkie-talkie frequency, can repeat 4) and 5) the steps.
　　7) to write off frequency line, two walkie-talkie test, if unable to breath or to receive the need to re-write frequency.

4．To address issues related to

Q: When reading of the walkie-talkie frequency band or write for a long time when no response or communication error?
A: 1) Check whether the line was damaged frequency;
　　2) Please check you write lines and frequent computer with a walkie-talkie or serial interface is bad or loose;
　　3) Check the walkie-talkie batteries installed correctly, if requested to re-install the correct;
　 　4) Check whether the walkie-talkie batteries are low or no electricity, if requested to replace batteries or an electric current to the battery charge and progress;
　　5) Check the frequency to write software with the current model relative talkies or match;
　　6) Please check frequently write software in the port is set to COM1;
　　7) Check whether the walkie-talkie in power turned on.

Q: When the frequency was completed, the two found a walkie-talkie can not call or receive?
A: 1) Make sure whether the two walkie-talkie in the same channel;
　　2) Make sure the two of the volume is too low walkie-talkie, if put up to the largest volume;
　　3) Check whether the two walkie-talkie in a boot or a state or low-voltage electricity in the state.

Q: If it is found that the model does not correspond to write a walkie-talkie frequency software?
A: You can visit our VEV walkie-talkie official Web site for download.
　　Web site is http://www.gzwew.com/Vdownload.asp?v=1
　 　If you operate in the course of any problems,You can also call our customer service telephone consultation into contact 13711161116.